Description

Material: Stainless Steel, Glass and Ceramic.

Surface Finish: Multiple variations available.

Standards: N/A.

Applications:

• Interior kitchen fit outs especially for backsplashes
• Can be used as bathroom walls
• Can be used on Floor for design
• Ceilings architectural designs

 

PRODUCT DESCRIPTION:

With a range of different materials and designs available, mosaic tiles is a perfect and cost effective way to turn any internal wall to a work of art. We are able to offer finishes of stainless steel which include all our available finishes. Materials such as glass, ceramic, mother of pearl, etcetera can be mixed with stainless steel tiles further enhancing the beauty of the mosaic.

Our mosaic tiles are easy to install and take no time at all. You can find a step by step installation procedure under our technical specification.

Applications / Designs:

Interior kitchen fit outs especially for backsplashes.

Can be used as bathroom walls.

Can be used on Floor for design.

 

Technical Specification

 

SIZE (mm)		MOQ
CHIP SIZE	SHEET SIZE	M2
15x48x8	300×300	36
15x48x8	300×300	36
15x48x8	300×300	36
15x48x8	300×300	36
(23×23+23×48+48×48)x8	300×300	36
48x48x8	300×300	36
(23×23+23+48+48×48+48×98)x4	300×300	36
(23×23+23×48+48×48+48×98)x8	300×300	36
(23×23+23×48+48×48)x8	300×300	36
48x48x48	300×300	36
(23×23+15×300)x8	300×300	36
(23×23+15×300)x8	300×300	36
(23×23+15×300)x8	300×300	36
(23×23+15×300)x8	300×300	36
(23×23+23×48+48×48)x8	300 x300	36
	300×300	36
	300 x300	36
	300×300	36
	300 x300	36
	300 x 300	36
	300 x300	36
	300×300	36
	300 x 300	36
	300×300	36
	300×300	36
48x48x8	300×300
20×8	310×300
15x98x8	298×305
25x25x8	305×315
	298×298
(23×23+48×48)x8	300×300
(23×23+48×48)x8	300×300
48x48x8	300×300
	300×300
	300×300
	300×300
(23×23+23×48+23×98)x8	298×320
(23×23+23×48+23×98)x8	298×320
	298×298
	300×300
	283×302

How-To Install

How-to Install Metal Tile on a Kitchen Backsplash or on Other Wall Applications

Installing metal mosaic tile, including stainless steel mosaic tile, aluminium mosaic tile and copper mosaic tile, is nearly identical to the process of installing ceramic or glass tile. Please note the same process also applies to installing mosaic tiles on a floor. The only difference is that the type of adhesive used to install metal mosaic tile on a wall or backsplash is different than the adhesive made for floor tile installation. This is merely a how-to guide and should only be considered an informational resource. The writer and publisher of this article is not responsible for any mis-installation, misuse, and errors or damaged caused by the direct or indirect use of the content in this article.

NOTE: Because of the metallic nature of stainless steel tile you should ensure a qualified electrician carries out electrical work around metal tile.

REQUIRED INSTALLATION TOOLS AND MATERIALS FOR METAL MOSAIC INSTALLATION

• Enough metal mosaic tile to cover the area that you require, we recommend ordering 10-15% more than you measure, to account for overages.
• Enough wall or floor tile mortar / adhesive to cover the area you are going to be tiling. Mortar for standard ceramic porcelain tile is 100% compatible with our products.
• Enough grout to cover the area you are going to be tiling (if the tile has grout lines). Use non-sanded grout to avoid scratching the finish of the tile. You can also use epoxy grout.
• 5/32″ V-notch trowel for applying mortar (other similar V-notch trowel sizes will also work).
• A rubber grout float.
• A couple of clean sponges and/or cheesecloth towels.
• Two or three buckets, for water mixing the mortar and grout.
• A wet tile saw / motorized tile cutter if there are any cuts to be made around certain obstacles. Most stainless steel is a ceramic base with a metal cap, not solid steel.
• OPTIONAL – A flat wood block (a 2×4 around 6″ to 12″ long works well) and a hammer or mallet.